Logo Made in Germany INDIAWOOD 2016

AKE Knebel GmbH & Co. KG

Booth number: H1UL B202

About us

Specialization as success factor: The long-established company of A|K|E
Since 1960 A|K|E has been standing for highest quality in industry and crafts. A|K|E today is one of the leading manufacturers of circular sawblades and cutting tools worldwide. Whether individual tools or demanding standards are required: the solution is always A|K|E.

A|K|E is a family-run, medium-sized company with international orientation. Our position offers decisive advantages to our customers. They meet the versatility and competence of a big company and take advantage of the promptness and flexibility of a small firm. Our specialisation, the proverbial precision, the innovative approach and a huge wealth of experience help our customers to gain the top.

Products and services

Highest quality for industry as well as craftsmen and DIY users
Being a full-range supplier in the field of precision tools we supply to both industry and well-assorted specialist retailers.

A|K|E provides complete system solutions for:
•wood processing
•metal industry
•processing of plastic and composite material

Our delivery pogramme comprises an extensive range of high-quality standard tools as well as customised solutions. A|K|E is considered to be the specialist for customer-specific solutions - customised to meet your special requirements. Our experienced application engineers and technically skilled sales consultants will record your demand on the spot. Your tailor-made solution will then be elaborated at AKE. We will plan, design, produce and test your tool and, if requested, supply it directly to your machine for setting-up.

Circular Sawblade SuperPlus

Circular Sawblade SuperPlus

Circular Panel sizing saw blade
Super Plus. Tool service life + cutting Quality

APPLICATION: Longitudinal and cross cut
MATERIAL: Panel material raw and coatet, duroplastic material
MACHINE: Sizing saw combined with scoring Aggregate

Noise reduced due to N-slots in the saw body, division of
cut (clustered teeth) for longer tool service life and
improved cutting quality.

• High productivity
• Short set-up time
• Reduction of costs
• High quality
• Noise reduction

DP jointing cutter 2.0

DP jointing cutter 2.0

For sizing and jointing of wood-based panel material with and
without coating. Limited suitability for chip boards with low density and front-end processing of solid wood.

Chip board, MDF, Multiplex, hard wood and soft wood
longitudinal, wood-based panel material.

Edge banding machines

Jointing cutter with alternating axial angle for sizing and the
production of tear-free jointing edges; with V-line gullet.

DP Shank Cutter Nesting

DP Shank Cutter Nesting

High performance shank cutter

MATERIAL: Chip board; MDF; Multiplex wood-based panel material with and without coating

Stationary machine

With extremely rigid tool body made of heavy duty steel.
With alternating axial angle and gullets for optimal chip ejection. Suitable for high cutting performance. Feed rates depending on the material and diameter up to 30 m/min.

• No tool breach due to high-performance steel
• Increased feed speed
• Higher economic efficiency
• Longer service life

News & Innovations

Cutting 2.0 - the next generation of cutting 

They are called "SuperSilent" or "Harmony", the tools for next generation of the Cutting 2.0-Family

The new Harmony-DP-cutter
produces rebates and edges in perfect Quality. No frayed edges, no traces of precutters, but accurate storybook edges and absolutely smooth rebates even with veneered MDF or birch-Muliplex panels. From now on reworking will be a thing of the past. This is possible thanks to the findings of the resourceful AKE-R&D-department gained when designing the SuperSilent saw blade. Gullets are skilfully applied on these tools, allowing an optimal and controlled chip removal. Together with the large axial angle and a newly developped rebating knife they ensure higher precision and less noise with this new DP-Harmony cutter. The cutter causes a lower cutting pressure and is suitable for almost all wooden materials and compound materials. Amazing results are achieved even in solid wood. As there is no more multiple chipping the service life is three times longer compared to conventional diamond-tipped tools.

The SuperSilent-DP-Sawblade
is the universal tool that lives up to its name. It cuts simply all wood-based material such as chip board, MDF or plywood continuously. Even so, if coated on both sides. Especially solid wood can be processed in unprecedented quality with longitudinal cuts and cross cuts. Even abrasive material such as laminate doesnot pose any obstacle for this tool.The SuperSilent saw blade has so far not only been winner of the LIGNA-Innovation award. It has just now been awarded the red dot design prize 2014 and even received the additional appreciation of „honourable mention“ for remarkable and particularly successful detail solutions.

The new Harmony cutter is already design patent pending, experts are curious about the first nominations. And more products of the cutting 2.0 family will come soon to the market.



AKE Knebel GmbH & Co. KG
Hölzlestr. 14+16
72336 Balingen

Phone: +49 7433 261-0
Fax: +49 7433 261-100

Max Deißenberger
Phone: +49 7433 261-173

Business matching
Get in contact with German companies in 3 easy steps! With one single question you can reach all relevant German Pavilion exhibitors of your selected industrial branch.

Click here if you notice an image that violates copyright or privacy rights.

Your personal organizer

Your personal organizer

Print list  |  Save as PDF
Jowat Adhesives India Pvt. Ltd.
Booth number: H1UL C301
Kesseböhmer GmbH
Booth number: H1UL A110
Andritz AG
Booth number: H1UL A116
Schattdecor AG
Booth number: H1UL A112
Decora Kitchen Interiors Pvt. Ltd.
Booth number: H1UL C306
AKE Knebel GmbH & Co. KG
Booth number: H1UL B202