The Antistatic Coolant LP289/99® is sprayed directly on the upper and lower edge area of the workpiece (glue joint) by means of our spraying systems.
As a result the glue joint surface is hardened. It can be fitted downstream of the last contact pressure roller.
The glue build-up on the tools is notably reduced and consequently the glue is no longer transferred onto the edging material (indispensable for PUR).
Furthermore, the edging material is statically discharged. Tracer rollers and workpieces remain free from milling chips. Milling of (flush trimming) the edges causes static charging of the edging material and the adjoining top and bottom face of the workpieces.
Milled off chips adhere to the edging material and on the top and bottom surface of the panel negatively impairing the function of the tracer rollers and making a precise finishing by scraper blades or milling impossible.
This system remedies the problems mentioned above instantly!
Exhibitor: RIEPE GmbH & Co. KG